About Concrete Leveling

In civil engineering, concrete leveling, also known as tiling, is a process which attempts to repair an uneven concrete surface by changing the underlying foundation on which the surface sits. Concrete leveling involves the application of mechanical tools in order to flatten out the area between two slabs, or between individual slabs if they are long and wide. Most often this type of work is carried out outside, although it can also be carried out inside some buildings, particularly where plumbing and electrical systems are located. Visit Concrete Hero – Concrete Leveling.

There are many different ways in which concrete leveling can be carried out. It can be done manually using heavy cranes or other high-tech machinery, or it can be done using a series of raised beds across a finished floor. A series of raised platforms can be put into place above the concrete surface, and ladders will then be used to get people up to the platforms. Ladders can also be laid along the sides of an existing concrete slab in order to level off the floor, or they can be placed onto the floor itself. Whatever method is used to level a concrete floor, the process should be done slowly and deliberately to avoid any accidents.

The actual vertical movement used in concrete leveling, which can be done manually or by machinery, usually begins at one edge of the existing concrete laying area. Here, either a heavy crane or a set of stairs will be raised into position, and workers will move their equipment over the top of the leveling layer, which will in turn force the existing concrete to settle to the lowest part of the ground. Once this has occurred, the leveling crew will move out of the way, leaving the new concrete in the place. Once the new concrete has been installed, it will be covered with a special finishing compound. This finishing compound will protect the new concrete from stains, moisture, or corrosion, and it will make the concrete smooth again.