Homeowners often underestimate the importance of garage door Service. As a homeowner, you need to service your garage door periodically, just as you need to service your car for its long life. In this article, we will explore different facets of garage door service and things that you should stress upon. Our website provides info on Local Garage Door Pros
Garage Door Repair
Before coming to garage door repairs, it is better if you understand how a garage door operates. Overhead garage doors either roll up in sections or swing up in one piece. There is a spring that is at the center stage of the operation. The door moves on metal tracks on the garage walls. Mostly, garage gate service is required to rectify either the spring or the metal track.
Garage Gate Services- Step 1:
At the outset, check the metal tracks. Have a look at the mounting brackets. During garage door service, you might need to tighten the bolts and screws that fit the brackets with the walls. The tracks need to be observed for any occurrences of dents, crimps, or flat spots. In case of any spots, they can be made smooth with a rubber mallet. A hammer and a block of scrap wood will also help. In case the tracks are damaged beyond repair, they need to be replaced.
Garage Gate Services- Step 2:
In the second step of garage gate service, you should check whether the tracks are properly aligned. Ideally, the horizontal tracks should slant slightly down forward. The direction of the tilt should be towards the back of the garage. For roll-up doors, the vertical sections of the track should be perpendicular. If you find that the tracks are not properly aligned, loosen the hardware that holds the mounting brackets. Thereafter, tap the tracks gently in order to position them correctly.
Garage Gate Services- Step 3:
In the next step of garage gate service, you need to clean the tracks with concentrated household cleaner to remove dirt and grease. The rollers need to be cleaned properly. After clean up, wipe both the tracks and the rollers to make them dry enough.
Garage Door Services- Step 4:
In the next step, you need to lubricate both the tracks and the rollers. Use garage door lubricant spray or powdered graphite in case of tracks. For the rollers, use household oil or silicone spray.
Garage Gate Service – Step 5:
The next step of your garage entrance service involves the hardware stuff. If you find loose hardware, tighten them. In case of swing-up doors, have a look whether the spring is mounted properly. If not, tighten its screws. In case of roll-up doors, check the hinges. Tighten loose screws, if any.
Garage gate Services- Step 6:
The last step of your garage gate service involves the springs. You might need to move the spring hook to the next hole or notch in order to adjust the tension. In case of roll-up doors, you might need to adjust the spring’s tension by pulling the cable through the plate.